Buy N-Acetyl Semax Amidate 20 mg
€27.76
N-Acetyl Semax Amidate, 20 mg, is a terminally modified seven-residue peptide for analytical and in vitro laboratory research. Pharma Research .eu provides documented European supply subject to lot-specific purity, sequence and identity verification.
Buy N-Acetyl Semax Amidate, 20 mg, for Advanced Laboratory Research in Europe
N-Acetyl Semax Amidate is a chemically modified seven-residue Semax analogue used as a laboratory reagent in peptide analytics, structureβstability comparisons and controlled in vitro neurobiological research. The commonly reported structure is Ac-Met-Glu-His-Phe-Pro-Gly-Pro-NHβ, with formula CββHβ βNββOββS, CAS Registry Number 2920938-90-3 and average molecular mass approximately 854.97 Da. Pharma Research .eu presents this 20 mg format for qualified European laboratories requiring documented research materials.pubchem.ncbi.nlm.nih+2
Uncompromising Purity and Analytical Characterisation
N-Acetyl Semax Amidate should be specified as:
Ac-Met-Glu-His-Phe-Pro-Gly-Pro-NHβ
The molecule contains an N-terminal acetyl cap and a C-terminal amide. These modifications are essential to its identity and distinguish it from unmodified Semax, which has different terminal groups, molecular composition and mass. The supplier should state the stereochemical form of each residue and confirm that the material is not a mixture of capped, uncapped, amidated or non-amidated variants.
For laboratory procurement, the suitable target is β₯99.0% purity by RP-HPLC, subject to confirmation by the actual lot-specific certificate of analysis. Some commercial specifications use β₯98%, while others report β₯99%; the batch chromatogram and release documentation should control acceptance.file.medchemexpress+2
A complete CoA should include:
-
RP-HPLC purity percentage, method and chromatogram.
-
LC-MS, ESI-MS or high-resolution MS identity confirmation.
-
Full sequence and terminal-group designation.
-
Confirmation of N-acetylation and C-terminal amidation.
-
Molecular formula and molecular mass for the supplied form.
-
Free-peptide, acetate or other salt-form information.
-
Visual appearance of the lyophilised material.
-
Residual-solvent results from synthesis and purification.
-
Water or residual-moisture content, where measured.
-
Heavy-metal or elemental-impurity results where included in the quality programme.
-
Lot number, manufacture date, retest date and storage requirements.
The commonly reported molecular formula is CββHβ βNββOββS, with average molecular mass approximately 854.97β854.98 g/mol and exact mass approximately 854.3745 Da. Public records occasionally report alternative formulae or masses for differently capped Semax-related peptides, so the supplierβs sequence-specific CoA should control the final technical specification.pubchem.ncbi.nlm.nih+2
The material is generally supplied as a white to off-white lyophilised powder. Visual inspection can identify gross discolouration, vial damage or visible contamination, but cannot establish identity or purity. Analytical release should combine appearance assessment with RP-HPLC and mass-spectral confirmation.
High purity is important because the peptide contains methionine, which may undergo oxidation, and because incomplete acetylation or amidation can produce closely related impurities. Such species may alter retention time, molecular-ion distribution, solubility, proteolytic stability and in vitro assay response. Lower-grade or non-characterised material may be unsuitable for quantitative LC-MS, stability-indicating work or reproducible structureβactivity comparisons.
If bacteriostatic water is supplied as a separate companion reagent, it should have its own label, expiry date, preservative information and documentation. Preservatives may affect chromatography, ionisation, adsorption, pH or cellular assay performance.
Principal Laboratory Applications and Research Methodologies
N-Acetyl Semax Amidate is suitable for controlled laboratory research involving modified-peptide chemistry, analytical characterisation and in vitro neurobiological model development. All applications should be conducted by qualified personnel within an appropriately governed university, CRO, pharmaceutical R&D or analytical laboratory.
RP-HPLC and LC-MS method development. The peptide can serve as a defined modified-sequence analyte for retention-time assignment, intact-mass confirmation and impurity profiling. Analytical methods should distinguish the amidated and acetylated principal component from unmodified Semax, partially capped material and oxidation products.
Comparative structureβstability studies. Laboratories may compare N-Acetyl Semax Amidate with other Semax-related materials to examine the effect of terminal modification on chromatographic retention, mass-spectral response, solution stability and resistance to selected degradation conditions. Such comparisons require matched purity, concentration and solvent conditions.
Peptide degradation and oxidation studies. The methionine residue provides a relevant analytical marker for controlled oxidation experiments. Researchers may monitor mass shifts and new chromatographic peaks under defined light, temperature, pH and oxidative-stress conditions. The method should distinguish methionine oxidation from hydrolysis, adsorption or incomplete dissolution.
In vitro neurobiological assays. A verified batch may be evaluated in cell-free or cellular models examining peptide-associated signalling, neurotrophic pathways or stress-response read-outs. Experimental design should include vehicle controls, matrix blanks, concentration confirmation and independent assessment of peptide integrity during incubation.
The 20 mg quantity corresponds to approximately 23.4 Β΅mol using the reported average molecular mass of 854.97 g/mol. A final concentration cannot be stated without the intended reconstitution volume, solvent, purity, salt form and water content. Any product page should avoid presenting an assumed concentration.
If bacteriostatic water is used for an aqueous stock, its preservative composition should be evaluated for compatibility with the selected assay. For LC-MS, solvent blanks and matrix-effect checks may be required. For cellular workflows, the diluent should be tested independently for effects on viability and assay background.
Compound Stability, Optimal Storage, and Safe Handling Protocols
The lyophilised peptide should remain sealed, dry and protected from light until required for a validated laboratory procedure. Research-product references commonly recommend storage at approximately β20Β°C, with prepared solutions held at 2β8Β°C only for a validated short-term period. Exact solution stability depends on concentration, pH, container, solvent and storage history.peptalabs+2
Recommended controls include:
-
Store unopened lyophilised material at β20Β°C unless the CoA specifies otherwise.
-
Keep the container tightly closed, dry and protected from direct light.
-
Allow a sealed vial to reach room temperature before opening to minimise condensation.
-
Use low-binding tubes where adsorption could affect recovery.
-
Prepare aliquots if repeated vial access is expected.
-
Store short-term aqueous solutions at 2β8Β°C only where validated.
-
Use frozen aliquots for longer-term solution storage when supported by stability data.
-
Avoid repeated freezeβthaw cycles.
-
Monitor methionine oxidation during extended storage or stress studies.
-
Record solvent, concentration, preparation date, operator and storage history.
The N-acetyl and C-terminal amide groups may alter the peptideβs stability and chromatographic behaviour relative to unmodified Semax, but they do not eliminate the risk of oxidation, adsorption or concentration loss. A clear solution should not be assumed to retain full chemical integrity without analytical confirmation.
Reconstitution should be carried out using a validated laboratory procedure. Add the selected solvent gradually, allow the powder to hydrate and mix gently. Avoid vigorous agitation unless the method has demonstrated that it does not promote aggregation or sample loss. Confirm concentration and chromatographic integrity where quantitative results are important.
Handling should follow the current SDS and institutional chemical-risk assessment. Appropriate precautions generally include a certified fume hood or suitable local containment, nitrile gloves, safety goggles and a laboratory coat. Avoid aerosol generation and direct contact with the powder or solution. Dispose of contaminated materials through approved institutional chemical and laboratory-waste procedures.
Technical Specifications and Molecular Attributes
| Attribute | Specification |
|---|---|
| Product | N-Acetyl Semax Amidate, 20 mg |
| Common designation | Acetylated and amidated Semax analogue |
| Sequence | Ac-Met-Glu-His-Phe-Pro-Gly-Pro-NHβ |
| Residue count | 7 amino acids |
| IUPAC name | N-acetyl-L-methionyl-L-glutamyl-L-histidyl-L-phenylalanyl-L-prolyl-glycyl-L-prolinamide; confirm stereochemistry on the CoA |
| CAS Registry Number | 2920938-90-3 |
| Molecular formula | CββHβ βNββOββS |
| Average molecular mass | Approximately 854.97β854.98 g/mol |
| Exact mass | Approximately 854.3745 Da |
| Physical state and colour | Lyophilised white to off-white powder |
| Solubility profile | Aqueous reconstitution may be feasible; solvent and buffer compatibility require assay-specific validation |
| Typical purity | Proposed target β₯99.0% by RP-HPLC; verify the actual lot-specific result |
| Identity testing | LC-MS, ESI-MS or high-resolution MS |
| Long-term storage | Typically β20Β°C, sealed and protected from light and moisture |
The sequence, formula, CAS number and molecular mass are supported by PubChem and specialist chemical references. Conflicting catalogue records appear to describe other Semax-related structures, so the exact terminal modifications must be reconciled before procurement.pubchem.ncbi.nlm.nih+3
Pharma Research .eu: Your Premier EU Vendor for High-Purity Reagents
Pharma Research .eu can position N-Acetyl Semax Amidate as a documented European laboratory reagent for analytical chemists, biochemists and pharmacology research teams requiring a defined modified peptide. The product file should include a batch-specific CoA, SDS, sequence designation, terminal-group confirmation, purity result, identity data, salt-form information and storage instructions.
Any claim that Pharma Research .eu operates an ISO 9001-certified quality-management system should be supported by a current certificate identifying the issuing body, scope and validity. Claims concerning discreet or temperature-controlled logistics across EU member states should likewise be verified for the destination, carrier route, packaging and applicable transport requirements.
A quality-focused supplier should be able to discuss:
-
The distinction between N-Acetyl Semax Amidate and unmodified Semax.
-
N-terminal acetylation and C-terminal amidation.
-
Methionine-oxidation monitoring.
-
RP-HPLC purity and LC-MS identity testing.
-
Residual solvents, moisture and elemental-impurity reporting.
-
Packaging configuration and container-closure integrity.
-
Compatibility of any accompanying bacteriostatic water.
-
Storage, transport and documentation requirements.
Pharma Research .eu should therefore be described as a potential European source for research-grade N-Acetyl Semax Amidate, with vendor-specific certification and logistics claims verified through current records. The material is intended strictly for controlled laboratory research and analytical use by qualified personnel under applicable institutional procedures.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisqueΒ vestibulum amet elit ut volutpat.


Reviews
There are no reviews yet.