Buy Pinealon, 60 mg

€46.03

Pinealon, 60 mg, is a synthetic Glu-Asp-Arg tripeptide supplied for analytical and in vitro laboratory research. Pharma Research .eu provides documented European supply subject to lot-specific purity, identity and salt-form verification.

Category:
Description

Buy Pinealon, 60 mg, for Advanced Laboratory Research in Europe

Pinealon is a synthetic tripeptide commonly designated Glu-Asp-Arg or EDR. It is supplied as a laboratory research reagent for peptide analytics, physicochemical characterisation and controlled in vitro investigations. The commonly reported composition is C₁₅H₂₆N₆O₈, with an average molecular mass of approximately 418.4 g/mol. Pharma Research .eu presents this 60 mg format for qualified European laboratories requiring documented, traceable peptide materials.purepeptides+1

Uncompromising Purity and Analytical Characterisation

Pinealon is generally described as the tripeptide Glu-Asp-Arg, comprising glutamic acid, aspartic acid and arginine residues linked by standard peptide bonds. The exact stereochemistry, terminal groups and salt form should be stated in the supplier’s product documentation because these attributes affect molecular mass, chromatographic behaviour and assay calculations.

For laboratory procurement, the appropriate target is ≥99.0% purity by RP-HPLC, subject to confirmation by the actual batch certificate of analysis. Some research suppliers report purity above 99%, while others use lower specifications; therefore, the lot-specific chromatogram should control acceptance rather than the catalogue description alone.americanpeptides+1

A complete CoA should include:

  • RP-HPLC purity percentage, method and chromatogram.

  • LC-MS or ESI-MS identity confirmation.

  • Peptide sequence and terminal-group designation.

  • Free-acid, acetate or other salt-form information.

  • Reported molecular mass and principal molecular-ion assignment.

  • Visual appearance of the lyophilised material.

  • Residual-solvent results from synthesis and purification.

  • Water or residual-moisture content, where measured.

  • Heavy-metal or elemental-impurity results where included in the quality programme.

  • Lot number, manufacture date, retest date and storage conditions.

The commonly reported molecular formula is C₁₅H₂₆N₆O₈, with an average molecular mass of approximately 418.4 g/mol and a monoisotopic mass near 418.1812 Da. Some commercial databases contain conflicting CAS assignments or formula records, so the vendor should reconcile the sequence, formula, salt form and analytical data before shipment.peerlesspeptides+2

Pinealon is normally supplied as a white to off-white lyophilised powder. Visual inspection can identify gross discolouration, vial damage or visible contamination, but it cannot confirm peptide identity or purity. Analytical release should combine appearance assessment with chromatographic purity and mass-spectral identity testing.

The short sequence does not eliminate the need for analytical control. Residual starting materials, deletion sequences, altered terminal groups, counter-ions and synthesis by-products may influence assay results, especially where Pinealon is used as a low-molecular-weight reference compound. High-purity material improves reproducibility in LC-MS, HPLC and comparative in vitro workflows.

A lower-grade or non-characterised reagent may be unsuitable for quantitative work because the stated mass may not correspond to the actual peptide content. For critical research, laboratories should correct calculations using the batch purity, water content and salt form provided on the CoA.

Principal Laboratory Applications and Research Methodologies

Pinealon is suitable for controlled laboratory research involving tripeptide chemistry, analytical method development and in vitro model systems. All applications should be conducted by qualified personnel within an appropriately governed university, CRO, pharmaceutical R&D or analytical laboratory.

RP-HPLC and LC-MS method development. Pinealon can serve as a defined small-peptide analyte for retention-time assignment, chromatographic optimisation, precursor-ion selection and product-ion evaluation. Analysts may compare reversed-phase, hydrophilic-interaction or other validated separation approaches according to the polarity and charge characteristics of the material.

Reference and system-suitability studies. A well-characterised lot may be used for instrument checks, sample-preparation recovery studies, calibration development and inter-run comparison. Unless the material has been formally certified under a recognised reference-material standard, it should be described as a research reference material or analytical reagent rather than a certified reference material.

Peptide stability and degradation research. Laboratories may investigate the effects of pH, temperature, light, oxidation, moisture and container material. Because small peptides may show adsorption or rapid changes in chromatographic recovery, stability studies should include concentration verification and suitable matrix controls.

In vitro biochemical investigations. Pinealon may be incorporated into controlled cell-free or cellular research models examining peptide-associated biochemical responses. These studies should include vehicle controls, blank matrices, concentration confirmation and an assessment of whether the selected diluent affects the experimental read-out.

The 60 mg quantity corresponds to approximately 143 µmol using the reported average molecular mass of 418.4 g/mol. The final concentration cannot be specified without the intended reconstitution volume, solvent, purity, salt form and water content. Any commercial product page should therefore avoid implying a standard working concentration unless the manufacturer has documented one for the particular lot.

If a laboratory prepares an aqueous stock, the selected diluent should be validated for the intended assay. Water, buffered aqueous media and other solvents can produce different recovery, pH, ionic-strength and adsorption profiles. A solvent blank should be included in analytical workflows.

Compound Stability, Optimal Storage, and Safe Handling Protocols

Pinealon should remain sealed in its lyophilised state until required for a validated laboratory procedure. Research suppliers commonly recommend storage at approximately −20°C, protected from light and moisture, with refrigeration at 2–8°C used for short-term access. These conditions are guidance rather than a guaranteed shelf-life claim; the lot-specific CoA and supplier stability data should take precedence.aminocoreresearch+1

Recommended controls include:

  • Store unopened lyophilised Pinealon at −20°C unless the CoA specifies otherwise.

  • Keep the container tightly closed, dry and protected from direct light.

  • Allow a sealed vial to reach room temperature before opening to minimise condensation.

  • Use low-binding tubes where adsorption could affect recovery.

  • Prepare aliquots if repeated vial access is expected.

  • Store short-term aqueous solutions at 2–8°C only where validated.

  • Use frozen aliquots for longer-term solution storage when supported by stability data.

  • Avoid repeated freeze–thaw cycles.

  • Record solvent, concentration, preparation date, operator and storage history.

Because Pinealon is a small, polar peptide, apparent loss may result from adsorption to plastics or altered chromatographic recovery rather than chemical decomposition. Laboratories should evaluate container compatibility and sample-recovery controls during method development.

Reconstitution should be performed under a validated laboratory procedure. Add the selected solvent gradually, allow the lyophilised material to hydrate and mix gently. Avoid vigorous agitation unless demonstrated to be compatible with the assay. If the prepared solution is used in a sensitive in vitro model, verify pH, concentration and solvent compatibility before beginning the experiment.

Handling should follow the current SDS and institutional chemical-risk assessment. Appropriate precautions generally include a certified fume hood or suitable local containment, nitrile gloves, safety goggles and a laboratory coat. Avoid generating aerosols and prevent contact with skin, eyes and laboratory surfaces. Dispose of contaminated materials through approved institutional chemical and laboratory-waste procedures.

Technical Specifications and Molecular Attributes

Attribute Specification
Product Pinealon, 60 mg
Common designation Pinealon; EDR tripeptide
Sequence Glu-Asp-Arg
Residue count 3 amino acids
IUPAC name Complex systematic naming should be confirmed on the CoA; sequence notation is preferred for procurement
CAS Registry Number 175175-23-2 is widely reported, but verify the exact form on the supplier’s CoA
Molecular formula C₁₅H₂₆N₆O₈
Average molecular mass Approximately 418.4 g/mol
Monoisotopic mass Approximately 418.1812 Da
Physical state and colour Lyophilised white to off-white powder
Solubility profile Aqueous solubility may be feasible; solvent and buffer compatibility require assay-specific validation
Typical purity Proposed target ≥99.0% by RP-HPLC; verify the actual lot-specific result
Identity testing LC-MS or ESI-MS
Long-term storage Typically −20°C, sealed and protected from light and moisture

The sequence, formula and molecular mass are reported consistently by several peptide-reference sources, while CAS records are less consistent across commercial databases. Procurement teams should require the supplier to reconcile the identity information before approving the product.purepeptides+2

Pharma Research .eu: Your Premier EU Vendor for High-Purity Reagents

Pharma Research .eu can position Pinealon as a documented European laboratory reagent for analytical chemists, biochemists and laboratory managers requiring a defined short peptide. The product file should include a batch-specific CoA, SDS, sequence designation, purity result, identity data, salt-form information and storage instructions.

Any claim that Pharma Research .eu operates an ISO 9001-certified quality-management system should be supported by a current certificate identifying the issuing body, scope and validity. Claims regarding discreet or temperature-controlled logistics across EU member states should likewise be verified for the destination, carrier route, packaging and applicable transport requirements.

A quality-focused supplier should be able to discuss:

  • The Glu-Asp-Arg sequence and stereochemical form.

  • Free-acid versus acetate or other salt form.

  • RP-HPLC purity and LC-MS identity testing.

  • Residual solvents, moisture and elemental-impurity reporting.

  • Packaging configuration and container-closure integrity.

  • Solvent compatibility and sample-recovery considerations.

  • Storage, transport and documentation requirements.

Pharma Research .eu should therefore be described as a potential European source for research-grade Pinealon, with vendor-specific certification and logistics claims verified through current records. The material is intended strictly for controlled laboratory research and analytical use by qualified personnel under applicable institutional procedures.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Buy Pinealon, 60 mg”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.